BOOTMOD3 Mini Cooper S & JCW B48

Bootmod3 Tuning for MINI F54 F55 F56 F57 F60 COOPER S & JCW 

Bootmod3 offers the world's first flash tuning cloud platform for the BMW F and G series and B48 Powered Mini Coopers.

Estimated Tuning Gains from Bootmod3 Maps*

• B48-H (High Compression) models:
  Stage 1 ACN91 octane: up to 30% HP / 32% TQ
  Stage 1 91 octane: up to 40% HP / 43% TQ
  Stage 1 93 octane: up to 42 % HP / 44% TQ
  Stage 2 ACN91 octane: up to 45% HP / 46% TQ
  Stage 2 91 octane: up to 50% HP / 48% TQ
  Stage 2 93 octane: up to 54% HP / 50% TQ
  
  B48-L (Low Compression) models:
  Stage 1 ACN91 octane: up to 10% HP / 13% TQ
  Stage 1 91 octane: up to 12% HP / 15% TQ
  Stage 1 93 octane: up to 14% HP / 16% TQ
  Stage 2 ACN91 octane: up to 15% HP / 16% TQ
  Stage 2 91 octane: up to 19% HP / 18% TQ
  Stage 2 93 octane: up to 22% HP / 20% TQ

About Bootmod3

As a cloud based solution with a simple web interface and mobile apps for iOS and Android. The BM3 Tuning System was developed over a period of 2 years from the ground up by ProTuningFreaks prior to its release in November 2016 .

Due to its cloud basis ProTuningFreaks are constantly updating the platform which makes the bootmod3 platform a custom Mini DME tuning solution like nothing we've seen on the market elsewhere. So we're please at Flashtuned to be partnering with ProTuningFreaks to bring this system to the Aussie Market. 

Bootmod3 have built the remapping platform for B48 powered Mini's and provide tuning solutions from stock to full race calibration, plus all stages in between, all with the ability to map switch  via the  mobile app. Bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes from the convenience of your driveway or anywhere internet access is available.

Some of the additional options which can be calibrated in your BM3 tune include:

• Speed limiter removal
• Exhaust burble (pops and bangs) in app on any map (OTS and custom)
• Exhaust flap adjusments
• Cold start removal for quieter cold start
• Cat efficiency check (CEL) removal if you are running Catless Downpipes
• Maps for upgraded turbos
• Custom Throttle mapping

*** Vehicles with November 2019+ software may require DME unlock done on the bench to enable OBD flashing. If you have the November 2019+ software update, feel free to contact us

*** An OBD ENET cable is required, can be purchased separately

B46 / B48 engine MINI Vehicles supported (if your vehicle is not listed please inquire with us):

• 2015-2019 F54 (Includes JCW models)
• 2014-2019 F55
• 2014-2019 F56 (Includes JCW models)
• 2014-2019 F57 (Includes JCW models)
• 2015-2019 F60 (Includes JCW models) 

*** DME removal from the engine bay is NOT REQUIRED for vehicles with pre March 2019 Software

VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

Some items used and/or installed by PRO TUNING FREAKS may void portions of your vehicle’s factory warranty. Some items may not be legal for “on highway use”. PRO TUNING FREAKS makes no guarantees to the legality of any parts used for “on highway vehicles” and accepts no responsibility for compliance with the vehicle’s factory warranty.